Operating
LED display:
■
No light = no power/battery not plugged in
■
Display constantly illuminated = in operation
■
Display flickers = standby, parking brake
■
activated
To start: Press button A. The trolley will run at
■
the last speed selected.
To stop: Press button A. The automatic parking
■
brake prevents the trolley from rolling forward.
Distance timer: While the trolley is stationary,
■
press button B for 2 seconds until the LED display
flashes quickly, then release it. The trolley will
move forward for 10 seconds at the set speed
and then stop automatically.
Press button B 5 seconds = trolley will
■
move for 20 seconds
Press button B 10 seconds = trolley will
■
move for 30 seconds
Setting the speed: Speed can be set variably
■
by turning the potentiometer (cog C).
Turn in the direction of travel = faster
■
Turn backwards = slower
■
Cleaning/Care/Storage
Clean the trolley with a damp cloth and/or compressed air. Avoid spraying it with water.
■
Always store the trolley in a dry location at room temperature.
■
Transport
Please use the transport bag to transport the caddy. This bag has a compartment for
■
the rear wheels at the bottom and dividers for three compartments in the upper storage
area. To prevent damage during transport (e. g. scratches), put the motor axle, the
control arm, and the front axle with wheel in separate compartments.
Important: The zipper for the wheel compartment should be opened and closed only
■
when the compartment above is empty to prevent it from tearing.
18
LED
B
C
A