Koenic KAF 4110 B Mode D'emploi page 17

Installation
Fig. Place the product on an even, solid and
1
heat resistant surface. Consider the
distance to the next socket outlet.
Note:
To ensure sufficient air circulation follow
minimum clearances as given below:
Sides: 10 cm
Back: 30 cm
Up: 30 cm
Warning
The product must not be placed into furniture.
The product must not be placed directly below
a plate, cupboard or cabinet.
Note that hot air escapes from the rear hot
air outlet. Make sure to keep the minimum
clearances and keep heat-sensitive objects away.
Operation
Pull the frying basket with pan out of
Fig.
2
the appliance using the handle.
Fill the food to be fried in the frying
Fig.
3
basket, but at maximum up to the MAX
mark.
Fig. Put the frying basket with the pan
4
back into the appliance. Make sure it is
correctly inserted.
Plug the mains plug into a suitable
Fig.
5
socket.
Press the on/off button to turn on
Fig.
6
the device. Set the desired mode with
the mode selection button. Please
observe the symbols and the following
deep frying table. If desired, set the
temperature and time individually with
the +/- buttons. The temperature
and time or the remaining time are
displayed alternately in the display.
Press the on/off button again briefly
to start the process. The operation
indicator lamp and the heating control
lamp illuminate.
IM_KAF4110B_180803_V04_HR.indb 17
All manuals and user guides at all-guides.com
Fig.
Fig.
Fig.
Note:
The fat that leaked from the foods during the
frying process will gather below the frying
grate. Therefore remove the frying grate from
the pan before removing the food, in order
to avoid that this fat is poured on top of the
foods.
The set temperature is reached after
approx. 2 to 3 minutes. When the
preset temperature has been reached,
the heating control lamp turns off.
Note:
The heating indicator light will turn
itself on and off during the frying
process. This is a normal occurrence
and indicates that the set temperature
is being kept.
During subsequent heat-up processes,
the heating control lamp switches
on again and again. The preset time
expires. When the time is up, a beep
sounds repeatedly and the unit
turns off. To turn off the hot air fryer
manually, press the on/off button.
To remove the food to be fried, pull
7
the frying basket with the pan out of
the appliance by the handle. Place the
frying pan on a flat and heat-resistant
surface.
Push the safety cover forward, press
8
the frying basket release button and
pull out the frying basket.
Put the fried food in a suitable bowl or
9
on a plate. If necessary, use a wooden
spatula to empty the frying basket.
When all parts have cooled down,
clean the device as described under
Cleaning and care.
English
17
3/8/18 11:05 am