Breville ikon Hemisphere BBL600XL /C Mode D'emploi page 5

BBL600XL_IB_p8-p9.pdf 1 15/03/11 10:17 AM
Operating your Breville ikon
Hemisphere LCD Blender
TM
The Breville ikon Hemisphere TM LCD Blender
features a patented assist lid. This allows the lid
to fit tightly onto the blender pitcher, avoiding
displacement during operation. The ring pull
design allows the user to easily remove the lid
with a simple leverage action. (See Fig 1)
Note
Fig 1
Step 5.
Plug the power cord into a 110 / 120V power outlet.
NEVER PLACE ANYTHING OTHER THAN FOOD AND LIQUIDS IN THE IKON HEMISPHERE™
LCD Blender WHILE THE MOTOR IS RUNNING.
8
continued
Step 6.
Press the 'Power' button on the far left of the control
panel to turn the blender on. The 'Power' button will
illuminate and flash. The LCD timer screen will
illuminate with '00' displayed.
Do not fill the blender pitcher above the 'MAX'
line. When the blender pitcher is filled at or near
the 'MAX' line place one hand on the blender lid
to avoid displacement of the lid during operation.
Note
Step 7.
Select the required speed (1 to 5) by pressing the
corresponding speed button. The blender will start to
operate and the selected speed button will illuminate.
The 'Power' button will illuminate and cease to flash.
The 'Stop' button will illuminate and flash. The LCD
timer screen will start counting upwards in one
second increments until 60 seconds is reached.
Operate the blender only for the appropriate
amount of time required – do not over process.
Note
Step 8.
When 60 seconds is reached, the blender will
automatically cease to operate and the selected
speed button and 'Stop' button illumination will go
out. The 'Power' button will illuminate and flash.
After a few seconds the LCD timer screen will
revert to '00'.
• The Breville ikon Hemisphere TM LCD Blender
will automatically stop blending after 60
seconds. This is a safety feature.
• To stop blending at any time, press the 'Stop'
button or the selected speed button. The
'Power' button can also be pressed, but this
will also turn the appliance off and all
illuminations will go out.
• The speed can be changed at any time during
the blending process. Each time a new speed
is selected its button will illuminate and the
previous speed button illumination will go out.
The number of seconds on the LCD timer
screen is not interrupted and will continue to
count upwards to 60 seconds unless interrupted.
Note
Step 9.
The Breville ikon Hemisphere TM LCD Blender features two
additional functions, 'ICE CRUSH' and 'SMOOTHIE'.
These are pre-programmed cycles which automatically
adjust the blending time and speeds to optimize
blending results. Select the required function by
pressing the corresponding function button. The blender
will start to operate and the selected function button
will illuminate. The 'Power' button will illuminate and
cease to flash. The 'Stop' button will illuminate and
flash. The LCD timer screen will start counting down in
one second increments until '00' is displayed.
When '00' seconds is reached, the blender will
automatically cease to operate and the function button
and 'Stop' button illumination will go out. The 'Power'
button will illuminate and flash.
• To stop blending at any time, press the 'Stop'
button or the selected function button. The
'Power' button can also be pressed, but this
will also turn the appliance off and all
illuminations will go out.
• The maximum amount of ice cubes the
blender can blend at any one time is 1
standard ice tray or 9 oz.
Note
9