Cisco 200 Serie Guide De Démarrage Rapide page 2

Welcome
Thank you for choosing the Cisco 200 Series Smart Switch, a Cisco Small
Business network communications device. This device is designed to be
operational right out-of-the-box as a standard bridge. In the default
configuration, it will forward packets between connecting devices after
powered up.
Before you begin installing the switch, make sure you have all of the
package contents available, access to the
Series Smart Switch Administration Guide , and a PC with a web browser
for using web-based system management tools.
Package Contents
• Cisco 200 Series Smart Switch.
• Rackmount Kit.
• Power Cord or Adapter
• This Quick Start Guide.
• Product CD.
This guide will familiarize you with the layout of the smart switch and
describe how to deploy the device in your network. For additional
information, see www.cisco.com/smb.
Mounting the Cisco Switch
1
There are two ways to mount the switch:
• Set the switch on a flat surface.
• Mount the switch in a standard rack (1 rack unit high).
Do not mount the device in a location where any of the following conditions
exist:
High Ambient Temperature—The ambient temperature must not
exceed 104 degrees Fahrenheit (40 degrees Centigrade).
Some switches have a higher temperature rating. The SG200-10FP,
N
OTE
SF200-24FP, SG200-26FP, and SG200-50FP are rated at 113 degrees
Fahrenheit (45 degrees Centigrade).
Reduced Air Flow—Both side panels must be unobstructed to prevent
overheating.
2
All manuals and user guides at all-guides.com
Cisco Small Business 200
200 Series Smart Switches