Introduction; Contacting Ideal Industries, Inc - IDEAL 61-557 Instructions

Introduction

The IDEAL 61-557 Voltage Continuity Tester is an auto ranging average root mean
square (ARMS) digital meter that measures AC and DC voltage, Low Impedance
AC Voltage (Lo Z) (to reduce the possibility of false readings due to ghost voltages)
, and continuity, via test-leads. It detects the presence of voltage between 90V
to 600V AC via a non-contact sensor in the top center of the meter. The meter is
also capable of performing a GFCI trip test via the probes. The meter also has a
flashlight and backlit display.
Arc Flash and Shock Hazard, Proper PPE Required. Follow all safety procedures,
wear proper PPE in accordance to NFPA 70E. Read and fully understand the
instruction manual prior to using this product. Failure to comply can result in
serious injury or death.

Contacting IDEAL INDUSTRIES, INC.

To contact IDEAL INDUSTRIES, INC., call one of the following telephone numbers:
IDEAL Industries USA Customer Service
• Phone Number: 800-435-0705
• Email: contactus@idealindustries.com
IDEAL Industries Canada Customer Service
• Phone Number: 905-683-3400
• Email: ideal_Canada@idealindustries.com
IDEAL Industries EMEA
• Phone Number: +44 (0)1925 444 446
• Email: eur.sales@idealindustries.com
IDEAL Industries Australia
• Phone Number: +61 3 9562 0175
• Email: InfoAUS@idealindustries.com
Or visit the IDEAL Electrical Website at www.idealind.com
To register your product, find manuals, watch videos, simply scan this QR code.
3