Checking A Gfci; Verifying Continuity - IDEAL 61-557 Instructions

Checking a GFCI

Remove the protective category caps form the ends of the probes. (BE CERTAIN TO
REPLACE THESE WHEN YOU ARE FINISHED.)
Insert the black probe into the gound slot. Insert the red probe into the small slot
(HOT)in the outlet.

Verifying Continuity (

• Verify the circuit is de-energized.
• The meter will sense the level of resistance and a beep if the resistance is less than
10 kΩ to confirm that continuity is present.
• Red LED will illuminate, and the continuity icon will remain displayed.
)
14