Klarstein FIGO Mode D'emploi page 13

INSTALLATION
1
Fasten the mounting
plate to a ceiling joist
with two screws, lock
washers and washers.
The ceiling joist must
be strong enough to
support the weight of
the moving fan.
4
Connect the internal
cables by plugging the
two plastic connectors
together until they snap
into place.
2
Attach the fan
components to the
mounting plate. Align
the ball joint of the fan
with the suspension lug
of the mounting plate.
5
Connect the cables of
the grounded power
source to the terminal
block.
3
Insert the remote control
receiver between the
clamp and the ball joint.
6
Slide the cover over the
mounting plate. Make
sure that you do not
disconnect any cables in
the process.
EN
13