Sophos XGS 116 Guide De Démarrage Rapide page 9

6. Connecting PoE Powered Devices
Ports 8 (on XGS 116(w) and 11/12 (on XGS 126(w)/136(w) are able to provide power over Ethernet (PoE)
to a connected PoE device which conforms to the standards 802.3af (max. 15.4W) or 802.3at (max.
30W). Each port can provide up to 30 watts max.
Please note: If a high performance expansion module is used in a XGS 126(w) or XGS 136(w) module slot
then the max. power of one PoE port will be limited to 15.4 watts.
Please visit www.sophos.com/en-us/support
about high performance expansion modules.
7. Appliance LED codes
LEDs on each RJ45 Ethernet Connector
ACT/LNK Green
(Left LED)
Speed Amber
(Right LED)
Green
Quick Start Guide XGS 116(w)/126(w)/136(w)
or contact your local Sophos reseller for more information
Solid 1. The Ethernet port has established link.
2. Good connection between the Ethernet port and hub.
Flashing The adapter is sending or receiving network data.
Off 1. The adapter and switch are not receiving power.
2. No connection between both ends of network.
3. Network drivers have not been loaded or do not function correctly.
On If Ethernet port is operating at 1000 Mbps.
On If Ethernet port is operating at 100 Mbps.
Off If Ethernet port is operating at 10 Mbps.
ENGLISH
7