Sophos XGS 116 Guide De Démarrage Rapide page 11

PoE LEDs (Front)
PoE1 Green
PoE2 Green
8. Support and Documentation
For more information and technical support, please visit
your local Sophos reseller.
Check our Getting Started resources to find out how you can get the most out of your purchase
www.sophos.com/get-started-firewall
Quick Start Guide XGS 116(w)/126(w)/136(w)
Solid PoE1 providing power to connected device.
Blinking fast PoE1 has an internal hardware failure.
*
Blinking slowly ** PoE1 is denied power (e.g. connected device requesting power above max.
power capacity) or is detecting a fault on connected device.
Off PoE1 not providing power to connected device.
Solid PoE2 providing power to connected device.
Blinking fast * PoE2 has an internal hardware failure.
Blinking slowly PoE2 is denied power (e.g. connected device requesting power above max.
**
power capacity) or is detecting a fault on connected device.
Off PoE2 not providing power to connected device.
www.sophos.com/en-us/support or contact
* The blinking behavior is an on/off cycle approx. once every 0.3 seconds.
** The blinking behavior is an on/off cycle approx. once every 2.5 seconds.
ENGLISH
9