Sophos XGS 116 Guide De Démarrage Rapide page 10

ENGLISH
LEDs on each SFP Connector
ACT/LNK Green
LEDs (Front)
Storage Blue
Status Green
Red
WiFi Green
Power 1 Green
Red
Power 2 Green
Red
8
Solid 1. The SFP connector is receiving power.
2. Good connection between the SFP port and hub.
Flashing The adapter is sending or receiving network data.
Off 1. The adapter and switch are not receiving power.
2. No connection between both ends of network.
3. Network drivers have not been loaded or do not function correctly.
Flashing SSD is being accessed.
Solid Normal operation.
Flashing Device is booting up or shutting down.
Solid SSD or boot failure.
Flashing General error (please contact support).
On WiFi is active.
Off WiFi is inactive.
Solid Power adapter 1 in normal operation.
Solid Power adapter 1 failed or disconnected.
Solid Power adapter 2 in normal operation.
Solid Power adapter 2 failed or disconnected.
Quick Start Guide XGS 116(w)/126(w)/136(w)