Interfaces - Sophos XGS 116 Guide De Démarrage Rapide

Interfaces

LAN Ports
1–8
9–10
(XGS 126(w)/136(w) only)
11–12
(XGS 126(w)/136(w) only)
F1
F2
(XGS 126(w)/136(w) only)
Other Ports
COM
USB
Expansion Bay
3G/4G Module
WiFi Module
Quick Start Guide XGS 116(w)/126(w)/136(w)
Type Speed
RJ45 10/100/1000 Mbps
RJ45 100/1000 Mbps
RJ45 XGS 126(w):
100/1000 Mbps
XGS 136(w):
100/1000/2500 Mbps
SFP 1 Gbps
SFP 1 Gbps
Type
Micro USB [front]
RJ45 [back]
USB 2.0 [Type A] [front]
USB 3.0 (Type A) [back]
Comment
Can be used for Sophos XGS 3G/4G Module, which is optionally available from your Sophos partner.
Can be used for Sophos XGS WiFi Module, which is optionally available from your Sophos partner.
Comment
Port 8 on XGS 116(w) can be used to power a connected device (e.g. access
point, IP camera, or IP Phone) via PoE with upto 30W (PoE 802.3at).
Both ports can be used to power a connected device (e.g. access point,
IP camera, or IP Phone) via PoE with upto 30W (PoE 802.3at) each.
SFP transceivers are sold separately.
SFP transceivers are sold separately.
Comment
You can connect a serial console to the Micro USB or RJ45 COM port
to access the CLI. Only one port can be used at any time. If both ports
are connected, then the Micro USB port will take precedence.
The required connection settings are:
Ì Bits per second: 38,400
Ì Data bits: 8
Ì Parity: N (none)
Ì Stop bits: 1
You can connect a USB 2.0 and/or 3.0 compatible device to
these ports (e.g. USB thumb drive, UPS, 3G/4G dongles).
ENGLISH
3