Metz mecablitz 52 AF-1 Mode D'emploi page 154

Setting the mode of operation
• Switch on the flash unit with the
button. The start screen appears.
Thereafter, the flash unit always switches
on with the mode of operation that was
TTL
used last.
-7,9 m
0,7
• Press the sensor button of the displayed
m
Z
F4.0
35
OOM
mode of operation on the touch display as
m
EV
many times as it takes for the display for
INFO
selecting the mode of operation to appear.
TTL HSS
M
• Press the
M HSS
touch display and select
• Press the
display.
M
7,9 m
k
• Set a suitable mode of operation on the
m
Z
35 F4.0
OOM camera, e.g.
m
INFO 1/1 • Tap the shutter release to transfer data
between the flash unit and the camera.
+
Various cameras support manual flash mode
M only in the camera's M mode (manual).
In other camera models, an error message
appears in the display and the release is
locked.
154
All manuals and user guides at all-guides.com
sensor buttons on the
M
.
M
sensor button on the touch
M
.
Manual partial light output levels
Partial light output can be set in manual flash
M
mode .
Setting procedure
M
• Press the sensor button for partial light
7,9 m
output on the touch display as many times
as it takes for the partial light output
m
Z
35 F4.0
OOM
m
display to appear.
INFO 1/1
1/1
• Press sensor buttons
7,9m
touch display and set the desired partial
1/1 -1 /
3
light output to 1/1, 1/2, 1/8 or 1/128.
1/16
• Press the sensor button on the touch
-1
1/16 /
3
display for the selected partial light output.
1/16 -2 /
3
The setting is immediately effective and
automatically saved.
The distance display is adjusted to the partial
light output automatically (see 5.2).
on the