Blendtec COMMERCIAL Serie Guide De L'utilisateur page 12

42� Pulse @ Speed 9
43� Disable Button
2. Custom Blend Cycles
3. CYCLE COUNTS
4. DIAGNOSTIC COUNTS
5. USB FLASH DRIVE
1� Import Profile
2� Export Active Profile
3� Export Counts
6. SETTINGS
1� Screen Standby
2� Blend Cycle Pause
3� Slider Lockout
4� Language� There are three
language options:
1� English
2� French
3� Spanish
7. BLENDER INFO
4.1.5 Selecting the Desired Profile
1� Press and hold the cancel/exit button for 3 seconds�
2� Select Profiles from the menu by touching the select button�
3� Use the scroll and select buttons to select either the Standard Profiles or
Custom Profiles category�
4� After selecting the Standard or Customer Profile category, you can scroll through
the profiles in the category and select the desired profile�
5� "Make this the active profile?" will appear on the screen� Press the select button
to confirm or the cancel/exit button to return to the previous menu�
4.1.6 Changing Programmed Cycle Buttons
Temporarily Change Cycle Buttons
To temporarily change cycle buttons when working in a selected profile,
complete the following steps:
1� Press and hold the cancel/exit button for 3 seconds�
2� Use the scroll button and then select Blend Cycles from the menu by
touching the select button�
3� Use the select button to choose the Standard or Custom Blend cycles�
4� Use the scroll button to find your desired cycle, then press select�
5� Enter the number you want to assign to the cycle, then press select�
10