Gtech AirRam AE34 Manuel D'utilisation page 55

Clearing a jam / fault
If the brush bar jams during use, the
AirRam will stop and the LEDs will appear
red. You will need to remove and clean the
brush bar (see page 53).
Troubleshooting
AirRam is not cleaning well
AirRam has stopped or won't work
Battery will not charge
1627_AirRam2_EuroIntl_manual_aw.indd 55
All manuals and user guides at all-guides.com
The AirRam will not re-start until the red
lights go out. This will take ten seconds.
If the problem persists, follow the
troubleshooting instructions below.
1. Empty the bin
2. Check bin is correctly fitted
3. Check filter is correctly fitted
4. Clean and/or replace filter
5. Check brush bar fitment
1. Charge battery
2. Clear debris from brush bar
1. Check connections
2. Check wall socket
10
seconds
ENGLISH
55
15/06/2017 15:28