Explanation Of Symbols; Technical Specifications - Roller Centro S1 Notice D'utilisation

eng
● Only use approved and appropriately marked extension leads with a suffi -
cient cable cross-section. Use extension leads up to a length of 10 m with
cable cross-section 1.5 mm², from 10 – 30 m with cable cross-section 2.5 mm².
Safety instructions for drill stands
WARNING
● Pull the plug out of the socket before making device settings or changing
accessories. Many accidents are caused by accidental starting of power tools.
● Set up the stand correctly before mounting the power tool. Correct assembly
is important to prevent the risk of collapsing.
● Fix the power tool securely to the stand before use. Slipping of the power
tool on the stand can lead to loss of control.
● Fix the stand to a fi rm, level surface or wall. The power tool cannot be guided
evenly and safely if the stand can slip or shake (see 3.3.).
● Do not overload the stand or use it as a ladder or scaffold. Overloading or
standing on the stand can shift the centre of gravity of the stand upwards and
cause it to tip over.
1 Technical specifi cations
Use for the intended purpose
WARNING
The ROLLER'S Centro electric diamond core drilling machines are intended for core drilling in mineral building materials such as concrete, steel-reinforced concrete, all
types of masonry, asphalt, all types of screed and natural stones using ROLLER'S universal diamond core drilling crowns, dry or with water feed, hand held or on a drill
stand in connection with a safety vacuum cleaner/dust extractor, e.g. ROLLER'S Protector M.
All other uses are not for the intended purpose and are therefore prohibited.
1.1 Scope of Supply
ROLLER'S Centro S1 Basic-Pack:
ROLLER'S Centro S1 Set 62:
ROLLER'S Centro S1 Set 62 Bohrständer S2:
ROLLER'S Centro S3 Basic-Pack:
ROLLER'S Centro S3 Set Bohrständer T:
ROLLER'S Centro S3 Set 62-82-132 Bohrständer T: ROLLER'S Centro S3 Basic-Pack, ROLLER'S Bohrständer T, 1 ROLLER'S Universal diamond core drilling
crown Ø 62-82-132 mm each.
ROLLER'S Centro S2/3,5 Basic-Pack:
ROLLER'S Centro S2/3,5 Set Bohrständer T:
ROLLER'S Centro SR Basic-Pack:
ROLLER'S Centro SR Set Bohrständer T:
ROLLER'S Centro SR Set 62-82-132 Bohrständer T: ROLLER'S Centro SR Basic-Pack, ROLLER'S Bohrständer T, 1 ROLLER'S Universal diamond core drilling
ROLLER'S Bohrständer S2:
ROLLER'S Bohrständer T:
18
All manuals and user guides at all-guides.com

Explanation of symbols

NOTICE
Electric diamond core drilling machine, water supply device, brace, start drilling aid with Ø 8 mm drill, size 3
Allen key, size
32 single open-ended wrench, operating instructions, steel case.
ROLLER'S Centro S1 Basic-Pack, ROLLER'S Universal diamond core drilling crown Ø 62 mm.
ROLLER'S Centro S1 Basic-Pack, ROLLER'S Bohrständer S2, ROLLER'S Universal diamond core drilling
crown Ø 62 mm.
Electric diamond core drilling machine, water supply device, brace, size 32 single open-ended wrench, operating
instructions, steel case.
ROLLER'S Centro S3 Basic-Pack, ROLLER'S Bohrständer T.
Electric diamond core drilling machine, water supply device, quick-release ring, size 32 single open-ended
wrench, operating instructions.
ROLLER'S Centro S2/3,5 Basic-Pack, ROLLER'S Bohrständer T.
Electric diamond core drilling machine, water supply device, brace, size 32 single open-ended wrench,
spacer set, operating instructions, steel case.
ROLLER'S Centro SR Basic-Pack, ROLLER'S Bohrständer T.
crown Ø 62-82-132 mm each.
Drill stand, size 6 Allen key, size 19 and 30 single open-ended wrench, 2 splay anchors, 10 anchor pins,
setting iron for anchor pins, cord threaded rod, quick-locking nut, washer, carbide masonry drill Ø 15 mm,
operating instructions.
Drill stand, size 6 Allen key, size 19 and 30 single open-ended wrench, 2 splay anchors, 10 anchor pins,
setting iron for anchor pins, cord threaded rod, quick-locking nut, washer, carbide masonry drill Ø 15 mm,
operating instructions.
WARNING Danger with a medium degree of risk which could result in
death or severe injury (irreversible) if not heeded.
CAUTION CAUTION
Danger with a low degree of risk which could result in minor
injury (reversible) if not heeded.
Material damage, no safety note! No danger of injury.
Read the operating manual before starting
Use eye protection
Use a respirator
Use ear protection
Use hand protection
Power tool complies with protection class I
Environmentally friendly disposal
CE conformity mark
eng