Fromm & Starck STAR ATFE 05 Manuel D'utilisation page 43

Pressing and holding the T button for 3 seconds you can toggle between the height
reading in centimetres or inches.
Energy saving mode:
After 10 minutes of inactivity, the panel will automatically enter the energy saving
mode. The panel will return to normal operation if you press any button.
Programming:
The user is able to program some of the parameters (S1-S7) as needed.
Step 1:
select the
parameter
S In every
1 case, to start
the setting,
hold down
the M and T
buttons
simultaneou
sly for about
5 seconds.
The letter S
with a
S
number will
2
appear on
the display.
Using arrows
you can
switch
between
parameters.
S
3
Step 2:
description
S1: setting the
minimum height.
Factory setting:
62.
Range: 62–118
(cm)/24.4–46.4
(").
S2: setting the
maximum
height. Factory
setting: 128.
Range: 72-128
(cm)/28.3-50.4
(").
S3: Set the anti-
collision
sensitivity (move
up). Factory
Step Step
3: 4:
adjust recor
d
1. Press
Press M to
the M save.
butto
n to
displa
y the
curre
nt
saved
value.
2.
Chang
e
using
the
arrow
s.
Messag
e
The L-S
change
has
been
saved.
L-F
change
has not
been
saved.
The H-
S
change
has
been
saved.
H-F
change
has not
been
saved.
S-S
change
has
been