When the TV is initially powered on, basic settings proceed automatically.
✎
Connecting the power cord and antenna.
Power Input
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWERP button. Plug & Play is available only when the Input source is set to TV.
✎
To return to the previous step, press the red button.
1
Selecting a language
2
Selecting Store Demo
or Home Use
3
Selecting an antenna
4
Selecting a channel
5
Setting the Clock
Mode
6
Viewing the hD
Connection Guide.
7
Enjoy your TV.
If You Want to Reset This Feature...
O
m → Setup → Plug & Play → ENTERE
MENU
Connecting to an Antenna
Plug & Play (Initial Setup)
Press the ▲ or ▼ button, then press the ENTERE button.
Select the desired OSD (On Screen Display) language.
Press the ◄ or ► button, then press the ENTERE button.
Select the
Home Use mode. Store Demo Mode is for retail
y
environments.
To return the unit's settings from
y
(standard): Press the volume button on the TV. When you see the
volume in the OSD, press and hold
ANT IN
Press the ▲ or ▼ button, then press the ENTERE button. Select Air, Cable or Auto.
✎
In Cable mode, you can select the correct signal source among
by pressing the ▲, ▼, ◄ or ► button, then press the ENTERE button.
The channel search will start automatically.
For more information, refer to Channel → Auto Program. (P. 12)
✎
Press the
ENTERE button at any time to interrupt the memorization process.
Set the Clock Mode automatically or manually.
✎
If you select the
Auto, set the daylight saving time.
Splitter
Select the time zone where you live.
The connection method for the best HD screen quality is displayed.
Press the ENTERE button.
VHF/UHF Antenna
or
R-AUDIO-L
P
R
Store Demo to Home Use
MENU
for 5 sec.
A
RF (A/B) Switch
CABLE
IN
OUT
BOX
Plug & Play
Language
Time
Game Mode
V-Chip
Caption
Melody
Cable
ANT OUT
P
Y
B
POWER
P
B
STD, HRC, and IRC
SLEEP
FAV.CH
: English
S.MODE
: Off
: Medium
7
English