Setting Up The Tv With Your Pc; Changing The Picture Options - Samsung 3 Serie Guide De L'utilisateur

Basic Features

Setting up the TV with your PC

¦
Set the input source to PC.
Auto Adjustment
O
MENU m → Picture → Auto Adjustment →
ENTERE
Adjust frequency values/positions and fine tune the settings
automatically.
✎
Not available when connecting through HDMI/DVI
cable.
Screen
Coarse / Fine : Removes or reduces picture noise. If the
■
noise is not removed by Fine-tuning alone, then adjust
the frequency as best as possible (Coarse) and Fine-
tune again. After the noise has been reduced, readjust
the picture so that it is aligned to the center of screen.
Position : Adjust the PC's screen positioning if it does
■
not fit the TV screen. Press the ▲ or ▼ button to adjust
the Vertical-Position. Press the ◄ or ► button to adjust
the Horizontal-Position.
: Resets the image to default settings.
Image Reset
■
Using Your TV as a Computer (PC) Display
Setting Up Your PC Software (Based on Windows XP)
Depending on the version of Windows and the video card,
the actual screens on your PC will probably look different, but
the same basic set-up information will apply in most cases.
(If not, contact your computer manufacturer or Samsung
Dealer.)
1. Click on "Control Panel" on the Windows start menu.
2. Click on "Appearance and Themes" in the "Control
Panel" window and a display dialog-box will appear.
3. Click on "Display" and a display dialog box will appear.
4. Navigate to the "Settings" tab on the display dialog-box.
The correct size setting (resolution)
y
[Optimum: 1360X768 pixels]
If a vertical-frequency option exists on your display
y
settings dialog box, the correct value is '60' or '60 Hz'.
Otherwise, just click 'OK' and exit the dialog box.
14
English
t

Changing the Picture Options

¦
Advanced Settings
O
m → Picture → Advanced Settings →
MENU
ENTERE
(available in Standard / Movie mode)
Compared to previous models, new Samsung TVs have a
more precise picture.
✎
In PC mode, you can only make changes to
and White Balance.
Advanced Settings
Black Tone
Dynamic Contrast
Gamma
Color Space
White Balance
Flesh Tone
Edge Enhancement
Black Tone (Off / Dark / Darker / Darkest)
■
black level to adjust the screen depth.
Dynamic Contrast (Off / Low / Medium / High)
■
Adjust the screen contrast.
Gamma : Adjust the primary color intensity.
■
Color Space (Auto / Native)
■
available to create the image.
White Balance : Adjust the color temperature for a more
■
natural picture.
R-Offset / G-Offset / B-Offset: Adjust each color's
(red, green, blue) darkness.
R-Gain / G-Gain / B-Gain : Adjust each color's (red,
green, blue) brightness.
Reset: Resets the White Balance to it's default
settings.
: Emphasize pink "flesh tone".
Flesh Tone
■
Edge Enhancement (Off / On)
■
boundaries.
Gamma
: Off ►
: Medium
: 0
: Native
: 0
: On
U Move E Enter R Return
: Select the
: Adjust the range of colors
: Emphasize object
: