Connecting To An Antenna; Plug & Play (Initial Setup) - Samsung 6 Serie Mode D'emploi

Getting Started
When the TV is initially powered on, basic settings proceed automatically.
✎
Preset: Connecting the mains and antenna.
Power Input
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWERP button. Plug & Play is available only when the Input source is set to TV.
✎
To return to the previous step, press the red button.
1
Selecting a language
2
Selecting Store
Demo or Home Use
3
Selecting a country
4
Selecting an antenna
5
Selecting a channel
6
Setting the Clock
Mode
7
Viewing the HD
Connection Guide.
8
Enjoy your TV.
If You Want to Reset This Feature...
Select Setup - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is "0-0-0-0." If you want to
change the PIN number, use the Change PIN function.
6
English

Connecting to an Antenna

Plug & Play (Initial Setup)
Press the ▲ or ▼ button, then press the ENTERE button.
Select the desired OSD (On Screen Display) language.
Press the ◄ or ► button, then press the ENTERE button.
Select the Home Use mode. Store Demo Mode is for retail
y
environments.
Return the unit's settings from
y
Press the volume button on the TV. When the OSD volume is displayed,
press and hold
MENU
Press the ▲ or ▼ button, then press the ENTERE button.
Select the appropriate country. If the desired country does not exist on the menu, select Others.
✎
After selecting the country in the
additional option to setup the pin number.
✎
When you input the PIN number,
Press the ▲ or ▼ button, then press the ENTERE button.
Select Air, Cable or Satellite.
Press the ▲ or ▼ button, then press the ENTERE button.
Select the channel source to memorise. When setting the antenna source to Cable, a step
appears allowing you to assign numerical values (channel frequencies) to the channels.
For more information, refer to Channel → Auto Store (P. 12).
✎
Press the ENTERE button at any time to interrupt the memorization process.
✎
When setting the antenn
Set the Clock Mode automatically or manually.
Press the ▲ or ▼ button to select Auto, then press the ENTERE button.
✎
If you select the Auto, select the time zone where you live.
The connection method for the best HD screen quality is displayed.
Press the ENTERE button.
R-AUDIO-L
Store Demo to Home Use (standard):
for 5 sec.
Country menu, some models may proceed with an
0-0-0-0 is not available.
a source to Satellite, refer to page 12.
VHF/UHF Antenna
Cable
or
ANT OUT
P P Y
R B
-