Listening To Fm Broadcasts - SOUNDMASTER UR190 Manuel D'instructions

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 29
Range Control)
DRC adds or removes a degree of compensation for the differences in the dynamic range between radio stations.
1. Press "SELECT" (12) to confirm the selection "DRC".
2. Rotate "SELECT" (12) to cycle through the below options. The asterisk behind the option indicates the
current setting.
"DRC off": No compensation applied.
"DRC low": Medium compensation applied.
"DRC high": Maximum compensation applied.
3. Press "SELECT" (12) to confirm the selected option.
Prune
This feature removes any stations that are in the list but have no service in your area.
1. Press "SELECT" (12) to confirm the selection "Prune".
2. Rotate "SELECT" (12) to cycle through the below options.
"No": Return to the previous menu.
"Yes": Remove invalid stations from the station list.
3. Press "SELECT" (12) to confirm the selected option.
System
See chapter "System menu" for details.
Selecting FM mode
1. Press „ON/OFF" (1) to turn the radio on.
2. Press "SOURCE" (2) to select FM mode.
Scanning for FM stations
In FM mode, press "SCAN" (9) or "SELECT" (12) to activate the automatic search for the next available
FM station.
After a strong FM radio station is detected, the search stops, and the FM radio station is broadcast.
Tuning the FM frequency
In FM mode, rotate "SELECT" (12) to tune up or down the frequency.
Once you have tuned up or down the frequency, press "SCAN" or "SELECT" (12) to activate the
automatic search for the next available FM station in the selected tune up or down direction.
Storing preset stations
You can store up to 10 FM stations as preset stations.
1. Tune to an FM station.
2. Press and hold "PRESET" (8) until "Preset Store" shows on the display.
3. Rotate "SELECT" (12) to select a preset number.
4. Press "SELECT" (12) to confirm.
5. The FM station is stored with the selected preset number.
Repeat steps 1-4 to store more preset stations.
To tune to a preset station, press "PRESET" (12) once, then rotate "SELECT" (12) to cycle through the list of
preset stations and then press "SELECT" (12) to confirm the selection.

LISTENING TO FM BROADCASTS

5
UR190 / English Instruction Manual

Publicité

Table des Matières
loading

Table des Matières