Maintenance And Storage - Ribimex Ribitech PRSPOT12M Manuel D'instructions Et D'utilisation

V. OPERATION
5.1- Intended use
- The product is intended for private household uses (e.g. in the house, in the garage or in the garden).
- The product is suitable for interior and exterior lighting.
- Do not use the product for unintended applications.
- Do not use the product for artisanal, industrial, professional and / or commercial applications (e.g. in
construction sites, public parks, sports fields...).
5.2- Instructions for operation
Check that the power supply you are using matches the specifications on the nameplate.
Carry out the electrical connection.
Switch on the product (through control switch).
Do NOT direct the light beam directly to the eyes or face (whether people and / or animals).
In order to limit glare and excessive light to others (people and homes), DO NOT direct the light beam beyond
the perimeter of your home. Do not direct the light beam towards surrounding dwellings.
Note: use of floodlights is not permitted if inclined more than 15 degrees above the horizon or, if the
inclination is greater than that angle, the floodlight shall be fitted with internal or external visors so as to
respect the proportion of light emitted above the horizon.
VI. MAINTENANCE AND STORAGE
Before any intervention on product, ensure that product is disconnected from its power
source.
6.1- Maintenance
- Clean plastic parts with a soft clean cloth.
- Do not use aggressive cleansers (solvents or abrasive cleansers), or an abrasive sponge.
- Never immerse product into water or any other liquid.
6.2- Storage
- Clean product before string it.
- Keep product, instructions manual and accessories in the original packing.
- Product must be stored in a dry, clean location protected from cold or heat. Always lock up product and keep
out of reach of children.
- Do not store the product at temperatures below 0ºC or above 40ºC.
6.3- Disposal
- Do not dispose the product with household garbage. Do not throw into the environment.
- Dispose of the product in a collection centre for waste of electrical and electronic equipment, or a waste
drop-off centre; or seek advice from your local municipality.
- Disposal of the product, accessories and packaging should be carried out according to local regulations
governing environment protection.
7- Examples of installation
See Fig.6+7+8+9.
Page 19 / 25