Maintenance And Storage - Ribimex TIMEO Manuel D'instructions Et D'utilisation

Using the remote control
• Press
button to power ON and OFF.
• Press BRT+ and BRT- buttons to adjust
the brightness steplessly.
• Press 25%, 50% and 100% buttons to
adjust brightness to 250 lm, 500 lm and
1000 lm instantly.
VI. MAINTENANCE AND STORAGE
WARNING!
Before any intervention on product, ensure that power is set to the "OFF" position.
Reminder: In order to maintain the machine in good working condition, carry out regular
maintenance of the machine after each use and before storage. Any breach or inadequate
maintenance reduces the life of the machine and increases the risk of breakdowns and accidents.
6.1- Cleaning
• Clean plastic parts with a soft clean cloth.
• Do not use aggressive cleansers (solvents or abrasive cleansers), or an abrasive sponge.
• Never immerse product into water or any other liquid.
6.2- Storage
• Clean the product before storage.
• Keep the product, instructions manual and accessories in the original packaging.
• Product must be stored in a dry, clean environment protected from dust. Always lock up
product and keep out of reach of children.
6.3- Disposal
Battery
• Do not throw with household rubbish or in the environment. Dispose of used batteries in
local collection centres.
Lamp body
• Do not dispose with household garbage. Do not throw into the environment.
• Dispose of the product in a collecte centre for waste of electrical and electronic equipment,
or a waste drop-off centre; or seek advice from your local municipality.
• Proceed with disposal of the tool, accessories and packaging according to local regulations
regarding the protection of the environment.
Page 13 / 21