Troubleshooting Chart - Panasonic CT-26WC15 Manuel D'utilisation

Troubleshooting Chart

Before calling for service, determine the symptoms and follow suggested solutions
A
UDIO
Noisy Audio
Noisy Audio
Noisy Audio
No Audio
Noisy Audio
No Audio
Picture shifts slightly (horizontally or
vertically) when turned on, while
Normal Audio
changing channels or within a
duration of two (2) hours of viewing.
Normal Audio
Wrong Audio
Normal Audio
Normal Audio
Intermittent Remote Control Operation
No effect when pressing TV front control panel keys
V
IDEO
Snowy Video
Multiple Image /
Color shift in picture
Interference
Normal Video
No Video with Snow
?
No Video
No Color
Normal Video
Black Box on Screen
Normal Video
Adjust antenna location and connection
Adjust antenna location and connection
Check antenna lead-in wire
Move television away from electrical appliances, lights,
vehicles and medical equipment
Increase volume
Check mute
Check television SPEAKERS on/off
Change channel
Set TV or Cable Mode Properly
Check antenna cables
Check if power cord is plugged into active outlet
Adjust brightness and audio controls. Normalize Picture settings.
Change channel
Check cable connections
Program the remote control again
Check second video source operation
Make sure that a PC is not connected to HDMI input.
This is a normal condition to prevent image burn-in. This feature can be
turned off. However, turning off this feature may result in image
retention on screen. (refer pg. 18)
Confirm that cables are in the correct jacks
Adjust color settings
Change channel
Check for broken pins on S-Video cable
Check if audio is set to Stereo or Mono, not SAP
Change CC (Closed Captioning) from Text Mode
Replace remote control batteries
Control panel may be locked. Press ACTION and TV/VIDEO buttons
on the TV front simultaneously, then quickly press ACTION and
VOL buttons simultaneously.
T
ROUBLESHOOTING
.
Solutions
C
HART
25