LG VC59 Serie Mode D'emploi page 16

CLENAING THE DUST TANK
AND FILTER ASSEMBLY
For best cleaning results,the dust tank should
be cleaned often.
1. Unplug cord from wall outlet.
2. Pull lid (20) release out and up, then lift
filter cover.
3. Pull the dust tank assembly up.(40)
4. Push the release lever(41) to open the
dust tank.
5. Wash the dust tank with sponge or soft cloth
under cold running water.
6. Disassembly the HEPA(42) and HEPA
cover(43).
7. Clean the HEPA(42) with the brush under
cold running water.
8. Take out the filter(45) and wash it under cold
running water.
9. Push the release lever(46) to open the
cyclone cover (47).
10. Take out the cyclone (48) and wash it under
cold running water.
11. Allow the HEPA and filter to dry in
shaded location .
Do not use detergent or wash in washing machine
or dishwasher.
Do not tumble or spin dry, nor microwave or
place in oven or in path of direct heat.
Ensure both the filter and tank are completely
dry before placing it back into the vacuum.
HOW TO FIT THE DUST BAG
If you want to use a dust bag instead of the
dust tank, please:
1. Unplug cord from wall outlet.
2. Pull lid release out and up, then lift filter
cover.
3. Pull the dust tank assembly up.(40)
4. Insert a bag (21)to the bag holder (22) firstly,
then fix the bag holder on the dust storage
- 15 -
E