Fitting The Wrist Strap - Eschenbach QUICKLOOK TOUCH Mode D'emploi

All manuals and user guides at all-guides.com
The Advanced Settings Menu:
Battery display – You can display the level of power
remaining in the battery in the upper left of the screen.
Sounds –Use this option to turn the sounds on or off.
Auto-off –This option will turn the unit off automati-
cally after 5 minutes of non-use.
Touchscreen – Use this option to enable and disable
the touchscreen.
The Info screen will display the revision of the soft-
ware within the unit.
Factory Defaults – will return the unit to its original
factory settings.
Reset
If Quicklook stops responding to button presses it may need to
be reset. Using a pen or similar instrument, press the reset button
recessed into the underside of the unit near the camera.

Fitting the wrist strap

Quicklook Touch is supplied with an optional wrist strap. To fit this,
pass the thin loop of the strap through the hoop on the top of the
unit. Pass the entire strap through the thin loop and pull tight.
- 23 -