Battery Level; Using The Menu - Eschenbach QUICKLOOK TOUCH Mode D'emploi

All manuals and user guides at all-guides.com
Manual Focussing
It is possible to manually change the focus on the Quicklook Touch:
simply power-on the unit while holding the Focus button and release
when the image is displayed. In use, repeated pressing of the Focus
button will step through various focus settings and an icon on the
display will indicate the focus level chosen. To disable manual focus
mode the unit must be powered-on with the Focus button pressed.

Battery Level

At start-up, the battery level is displayed in the corner of the screen for
10 seconds. You can choose to display it constantly from the Advanced
Menu (see below). The battery icon changes colour depending on the
remaining capacity and will display in blue if the unit is being recharged.
When the battery has only a few minutes power remaining, the bat-
tery icon is briefly displayed in the centre of the display.

Using the Menu

The Quicklook Touch has a menu system to allow you to custom-
ize it to suit your requirements. To bring up the menu, press and
hold the Mode button for three seconds until an icon appears on
the screen. The contents of the menu will change depending on the
mode you are in; the Colour Mode Menu contains these options:
and the Reading Mode Menu contains these options:
Use Zoom-up and Zoom-down to navigate through the menu choic-
es and press Mode to accept the choice.
Alternatively, tap Zones 2 & 4 to navigate and Zone 5
to accept.
- 20 -