Personnel Qualification; Intended Use; Product Description - Kessel Aqualift S Compact Instructions De Pose Et D'utilisation

2.2 Personnel - qualification
The relevant operational safety regulations and the hazardous substances ordinance or national equivalents apply for the
operation of the system.
The operator of the system must:
prepare a risk assessment
identify and demarcate corresponding hazard zones
carry out safety training
secure the system against unauthorised use.
Person
1)
Operating company
Technical expert, (familiar with,
understands operating instructions)
Technical specialist, (technical
worker, per installation instruc-
tions and execution standards)
Electrical specialist VDE 0105
(per regulations for electrical
safety, or per national equivalents)
1) Operation and assembly work may only be carried out by persons who are 18 years of age.
2.3

Intended use

The system may only be used for pumping away domestic non-faecal wastewater; however, it must not be used for flamma-
ble or explosive liquids or solvents.
The 'Resistant' system variant is additionally suitable for a combination of wastewater and salt-laden media as well as for
condensate from condensing boiler systems.
WARNING
Use of the system in a potentially explosive environment (ATEX) is not permitted.
All conversions or attachments that are carried out without the express and written permission of the manufacturer, the use
of non-genuine spare parts and repairs carried out by companies or persons not approved by the manufacturer will lead to a
loss of warranty.
The control unit is equipped with a protective circuit to protect the system's electrical components from damage in case of
possible voltage peaks.
This does not protect against lightning.
If such requirements exist, an appropriate protective device must be installed on site.
2.4

Product description

The system comprises the pump tank with backflow preventer and pressure connection, a telescopic upper section and
the polymer cover plate with drainage function. For deeper installations, an extension section (art. no. 83070) must be pur-
chased separately.
A float switch or a pressure sensor, depending on the version, is used for level detection.
The versions with pressure sensor always have a control unit (Tronic variants) in which the information is processed.
The versions with control unit also have an alarm probe. If there is a serious level exceedance, the control unit also issues
visual and acoustic warning signals.
016-059
Approved activities on KESSEL systems
Visual check, inspec-
tion, change of battery
Emptying, cleaning
(inside), functional
check, configuration
of the control unit
Lifting station/Installation and operating instructions
Installation, replace-
ment, maintenance
of components,
commissioning
Work on electri-
cal installation
21 / 104