Safety And Compliance - United States Stove Company 4840 Mode D'emploi

Heating Specifications
Heating Capacity
Fuel Burn Rate
Burn Time (lowest setting) 35 hours
Hopper Capacity
*Pellet size may effect the actual rate of fuel feed and burn times. Fuel feed rates may vary by as much as 20%.
Use PFI listed fuel for best results.
Dimensions
Height
Width
Depth of Unit
Depth with Mounting
Wall Bracket
Product Weight
Electrical Specifications
Electrical Rating
Watts (operational)
Watts (igniter running) 425 approximately
FUEL CONSIDERATIONS
Your Pellet heater is designed to burn certified Premium Hardwood pellets that comply with the Pellet Fuel Institute
(PFI) standards. Pellets that are soft, contain excessive amounts of loose sawdust, have been, or are wet, will result
in reduced performance. Failure to use proper fuel can affect the longevity of the appliance. Smaller pellets
could affect feed rates. Store your pellets in a dry area and well away from the heater. Do not use grates or other
methods of supporting the fuel. Burn fuel in burnpot without modification.

SAFETY AND COMPLIANCE

Your Pellet heater has been safety tested and listed to ASTM Std E1509-12 (2017), ULC S627-00, and (UM) 84-HUD.
WARNING: It is against federal regulations to operate this wood heater in a manner inconsistent with the
operating instructions in the owner's manual.
Note: Register your product on line at www.usstove.com. Save your receipt with your records for any claims.
Specifications
500 - 1,000 sq. ft.
3/4 - 2 1/2 lbs./hr.
28 lbs
27" [685.7 mm]
36" [914.4 mm]
12.43" [315.77 mm]
Approx. 14.27" [362.4 mm]
185 lbs
110-120 volt, 60Hz, 3.0 Amp
175 approximately
-3-