Table des Matières
Publicité
2. Place a suitable pan on the cooking zone that
you wish to use.
• Make sure the bottom of the pan and the surface
of the cooking zone are clean and dry.
3. Touching the heating zone selection control,
and the indicator upon the zone you touched will flash
4. Adjust heat setting by touching the slider control.
• If you don't choose a heat setting within 1 minute, the Induction hob will
automatically switch off. You will need to start again at step 1.
• You can modify the heat setting at any time during cooking.
If the display flashes
setting
This means that:
• you have not placed a pan on the correct cooking zone or,
• the pan you're using is not suitable for induction cooking or,
• the pan is too small or not properly centred on the cooking zone.
All manuals and user guides at all-guides.com
alternately with the heat
EN-12
Publicité
Table des Matières
