Hoover RMB9800/1IN Manuel D'instructions page 12

2. Hook the carbon filter over the pins that are located at the end of the motor.
3. Turn the carbon filter anticlockwise, until you feel it click into place.
Open
Close
※Repeat this process for the second carbon filter. You need to place a cabon filter at
either end of the motor.
※Refit the motor access panel and fully tighten the scrwes that you removed
previously.
※Refit the lower and upper chimney sections to the main body of the hood.
NOTE:
 Make sure the filter is securely locked. Otherwise, it would loosen and cause
dangerous.
 When activated carbon filter attached, the suction power will be lowered.
12