Carbon Filter - Hoover RMB9800/1IN Manuel D'instructions

- By hand: Soak them for about 3 minute in water with a grease-loosening detergent
then brush it gently with a soft brush. Please do not apply too much pressure, avoid
to damage it. (Leave to dry naturally out of direct sun light)
- In a dishwasher: Ensure that placement of the filters is made so as to not impede the
function of the spray arm. Washing the filters in a dishwasher may cause
discoloration of the aluminum inner mesh over time although it will not affect their
performance.
Filters should be washed separately to crockery and kitchen utensils. it is advisable
not to use rinse aid.
INSTALLING GREASE MESH FILTERS
• To install filters for the following four steps.
- Angle the filter into slots at the back of the hood.
- Push the button on handle of the filter.
- Release the handle once the filter fits into a resting position.
- Repeat to install all filters.
CARBON FILTER-buy separately
Activated carbon filter can be used to trap odors. Normally the activated carbon filter
should be changed at three or six months according to your cooking habit. The
installation procedure of activated carbon filter is as below.
1. Once the motor access panel is removed, you will be able to see the motor.
11