CARE & CLEANING
REMOvABLE BASE
To remove the base for cleaning:
1.
Remove the Lid from the Wok and ensure
the Temperature Control Probe has been
removed from the Probe Socket. Turn the
Wok upside down as illustrated below.
Turn the Quick Release Knob counter
clockwise as shown by the arrow.
14
2.
Lift the base from the Wok, lifting over
the Probe Socket.
The Wok Base and Bowl should be washed
in hot soapy water. Dry thoroughly.
NOTE
To extend the life of the non-stick
coating, we recommend that the Wok
Bowl, Base and Lid be washed by hand.
However, the Wok Bowl and Lid are
dishwasher safe. The recessed heating
element in the Wok Bowl is completely
sealed so it is safe to immerse in
water. The Wok Base should not be
placed in the dishwasher.
WARNING
The Hot Wok™ should never be operated
without the Wok Bowl and Base fully
assembled and locked into place.
NOTE
Before inserting the Temperature
Control Probe into the Probe Socket,
make sure that the interior of the Probe
Socket is fully dry. To do this, shake out
excess water, then wipe the interior of
the Probe Socket with a dry cloth.