Changing The Display Mode; Word Sync - Esoteric SA-10 Manuel Du Propriétaire

Changing the display mode

During playback, it is possible to change the display as shown
here.
When playback stops, the display mode reverts to the first type
of display.
Super Audio CD/CD playback
Currently playing track
Time remaining for current track
Total time remaining (disc)
Super Audio CD/CD (stopped)
Number of tracks on disc
Elapsed time of current track
Total elapsed time (disc)
Total disc running time

Word sync

This feature is used when you want to get your whole system
locked to a single sync signal (clock) by connecting this unit to
the Esoteric AI-10, G-0/G-0s or other devices that are capable
of outputting a sync signal (word clock).
Use the WORD button to switch between Word ON and
Word OFF.
The main unit can accept and synchronize to the following
frequencies received from external devices:
44.1kHz, 88.2kHz, 176.4kHz
This unit also accepts a Universal Clock frequency of 100 kHz.
< It takes several seconds for the unit to detect and lock to an
external clock.
< Make WORD SYNC connections before powering on the unit.
If no valid word sync signal is received, the display shows "No
Word!".
17