To Avoid Water Spillage; Disassembly And Cleaning; Cleaning The Air Filter (Every Two Weeks) - Wilfa Chill Connected AC1W-7000 Instructions

TO AVOID WATER SPILLAGE

• As the negative pressure of condensate drain pan is large, tilt the drain hose
downward toward the floor. It is appropriate that the degree of inclination
should exceed 20 degrees.
• Straighten the hose to avoid a trapping water in the hose.

DISASSEMBLY AND CLEANING

CLEANING THE AIR FILTER (EVERY TWO WEEKS)

Dust collects on the filter and restricts the airflow. The restricted airflow reduces
the efficiency of the system and if it becomes blocked it can cause damage to
the unit.
The air filter requires regular cleaning. The air filter is removable for easy
cleaning. Do not operate the unit without an air filter, or the evaporator may be
contaminated.
1. Press POWER button to switch off the unit and unplug the power cord.
2. Remove the filter mesh from the unit.
3. Use a vacuum cleaner to vacuum dust from the filter.
4. Turn the filter over and rinse the air filter under running water. Let the water
run through the filter in the opposite direction of air flow. Set aside and allow
the filter to air dry completely before reinstalling.
Switch off the unit and
remove the two air filters.
CHILL CONNECTED · AC1W-7000
Rinse the air filter under
running water.
17
EN