Thermo50_02_gb_g.fm Seite 39 Dienstag, 27. Mai 2003 12:08 12
Thermo 50
The fuel must be taken from the vehicle fuel tank or from a separate tank
(see Figs. 8, 9 and 10). This separate fuel pickup precludes any effect
of pressure.
Tank connector
Tank fitting
Fig. 8:
Fuel pickup from the plastic tank
(Pickup via tank fitting)
NOTE:
Deburr the cut on the tank connector after sawing it off and remove any
metal chips.
All manuals and user guides at all-guides.com
Sealing ring
Plastic tank
Sealing ring
Fig. 9:
Fuel pickup from the plastic tank
(Pickup via tank drain screw)
Hole pattern
Fig. 10: Webasto tank connector
NOTE on Fig. 10:
The fitting must be made from metal!
Fuel supply
Only use a tank connector if the
fuel tank is made from metal
39