Attach The Rail To The Header Bracket - Craftsman CMXEOCG232 Manuel D'utilisateur

INSTALLATION STEP 3

ATTACH THE RAIL TO THE HEADER BRACKET

1. Position the opener on the garage floor below the header
bracket. Use packing material as a protective base.
NOTE: If the door spring is in the way, you will need help.
Have someone hold the opener securely on a temporary
support to allow the rail to clear the spring.
2. Position the rail bracket against the header bracket.
3. Align the bracket holes and join with a clevis pin as shown.
4. Insert a ring fastener to secure.
Header Wall
Header Bracket
Garage
Door
NOTE: Your product may look different than the illustrations.
Idler Pulley
Header
Bracket
HARDWARE SHOWN ACTUAL SIZE
Clevis Pin 5/16"x1-1/2"
Mounting
Hole
Temporary
Support
Ring Fastener
15