Siemens TE603 Serie Mode D'emploi page 19

● Touch B to confirm.
Water will now flow through the filter to
rinse it�
● Then empty the drip tray and re-insert�
The appliance is ready for use again�
Rinsing the filter simultaneously acti-
F
vates the setting for displaying the
message "Please change water filter"�
When this message appears, or at
the latest after two months, the filter
will no longer be effective� It needs to
be replaced for reasons of hygiene
and to prevent a build-up of limescale
(which could damage the appliance)�
If you do not intend to insert a new filter,
select the setting No filter and touch B
to confirm.
If the appliance has not been used
F
for a prolonged period (for example,
while you are on holiday), the
existing filter should be rinsed before
the appliance is used again� To do
this, simply dispense a cup of hot
water�
All manuals and user guides at all-guides.com
Cleaning and care
Starting the special service programmes�
You can select Rinse the milk system,
Descale, Clean or calc'nClean�
● Use I to choose the desired
● Touch C to begin running the
F
Info Service programmes
(depending on the type of appliance)
Display how many beverages can still be
prepared before it will be necessary to run
one of the service programmes�
● Use I to display Clean after --- c or
● Touch F to exit from the display�
F
Frost protection
Service programme to prevent frost
damage during transportation and storage�
This programme completely empties the
appliance�
F
● Touch C to begin running the
The appliance empties all its pipes and then
switches itself off�
● Empty the water tank 5 and the drip
programme and touch B to confirm
your choice�
programme�
Important: Be sure to take
note of the section on "Service
programmes"�
Descale after --- c �
For technical reasons the counter
does not represent a precise number
of cups�
The appliance must be ready for use
and the water tank 5 must be filled�
programme�
tray 17�
en
15