Robot Pool Cleaner Classic 2 / Top 2
Operating Instructions
1. SPECIFICATIONS
Motor protection: IP 68
Minimum depth: 0.80m / 2.6ft
Maximum depth: 5m / 16.4ft
2. WARNINGS AND CAUTIONS
2.1. Warnings
• Use the originally supplied power supply only
• Ensure the electrical outlet is protected by a ground fault interrupter (GFI) or an earth
leakage interrupter (ELI)
• Keep the power supply out of standing water
CAUTION
• Position the power supply at least 3m / 10ft away from the edge of the pool
• Do not enter the pool while the pool cleaner is working
• Unplug the power supply before servicing
2.2. Cautions
When not in use store the Pool Cleaner on the Caddy in a shaded area.
Use the Pool Cleaner in the following water conditions only:
Chlorine
Max 4 ppm
pH
7.0 - 7.8
Temperature
6-34°C / 43-93°F
NaCl
Maximum = 5000 ppm
2
Robot Pool Cleaner Classic 2 / Top 2 | Operating Instructions