Assembly - weewell WPB900 Mode D'emploi

• Separate it from the breast pump shield (figure 3).
• Take out the nipple protector(1)
• Take out the seal plug(10)
• Dismantle bottle, teat and teat cap.
• Sterilize nipple protector, breast shield cup, teat cap, teat, bottle, bottle adapter, bottle
stand.
Figure 1

Assembly

• Please ensure your hands are clean before touching the sterilised components. Insert the
seal ring (8) and flow funnel (9) into the breast shield cup (2) tightly.
• Insert the nipple protector (1) into the breast shield cup.
• Insert the flat end of seal plug (10) into the hole at back of breast shield cup (2), press it
tightly, make sure there is no air gaps:
6 I WPB900 USER MANUAL
All manuals and user guides at all-guides.com
Figure 2 Figure 3