MeisterCraft MKR 1400 L Traduction Du Manuel D'utilisation Original page 45

5453680-Handkreiss-man 30.01.14 07:17 Seite 45
Setting the cutting depth
Fig. 3
1. Undo the adjustment screw (12).
2. Swing the saw shoe downwards.
3. Set the cutting depth using the scale.
Tooth tips must reach approximately
2 mm out of the wood.
Adjusting the saw shoe (angled cut)
1. Undo the adjustment screw (11).
2. Set the shoe to the required number
of degrees 0 – 45°.
3. Tighten the adjustment screw.
All manuals and user guides at all-guides.com
Setting the splitting wedge
12
7
4
1. Undo the adjustment screw.
2. Swing the saw shoe downwards.
3. Undo the screws.
4. Set the splitting wedge and tighten
Changing the saw blade
Fig. 4
Fig. 6
11
45°
B
1. Open the pendulum protective cover
2. Hold the flange (8) with the flange
3. Undo the hexagonal screw (6) with
4. Remove flange and blade by pulling
3
3 mm
the screws again.
6
8
and hold firmly.
wrench.
the pin wrench.
downwards.
Fig. 5
4
45