MeisterCraft MKR 1400 L Traduction Du Manuel D'utilisation Original page 41

5453680-Handkreiss-man 30.01.14 07:16 Seite 41
up or carrying the tool. Carrying
power tools with your finger on the
switch or energising power tools that
have the switch on invites accidents.
d Remove any adjusting key or wrench
before turning the power tool on. A
wrench or a key left attached to a
rotating part of the power tool may
result in personal injury.
e Do not overreach. Keep proper
footing and balance at all times.
This enables better control of the
power tool in unexpected situations.
f Dress properly. Do not wear loose
clothing or jewellery. Keep your
hair, clothing and gloves away from
moving parts. Loose clothes,
jewellery or long hair can be caught in
moving parts.
g Keep handles dry, clean and free from
oil and grease. Slippery handles do not
allow for safe handling and control of the
tool in unexpected situations.
h If devices are provided for the
connection of dust extraction and
collection facilities, ensure these
are connected and properly used.
Use of these devices can reduce dust
related hazards.
4 Power tool use and care
a Do not force the power tool. Use
the correct power tool for your
application. The correct power tool
will do the job better and safer at the
rate for which it was designed.
b Do not use the power tool if the
switch does not turn it on and off.
Any power tool that cannot be
controlled with the switch is
dangerous and must be repaired.
All manuals and user guides at all-guides.com
c Disconnect the plug from the
d Store idle power tools out of the
e Maintain power tools. Check for
f Keep cutting tools sharp and clean.
g Use the power tool, accessories
5 Service
a Have your power tool serviced by a
b To avoid hazards, damaged power
power source before making any
adjustments, changing accessories,
or storing power tools. Such preventive
safety measures reduce the risk of
starting the power tool accidentally.
reach of children and do not allow
persons unfamiliar with the power
tool or these instructions to operate
the power tool. Power tools are
dangerous in the hands of untrained
users.
misalignment or binding of moving
parts, breakage of parts and any
other condition that may affect the
power tool's operation. If damaged,
have the power tool repaired before
use. Many accidents are caused by
poorly maintained power tools.
Properly maintained cutting tools with
sharp cutting edges are less likely to
bind and are easier to control.
and tool bits etc. in accordance
with these instructions, taking into
account the working conditions and
the work to be performed. Use of
the power tool for operations different
from those intended could result in a
hazardous situation.
qualified repair person using only
identical replacement parts. This
will ensure that the safety of the
power tool is maintained.
leads must be replaced by the
41