EQUATION EQI-70C Instructions Pour L'installation, L'utilisation Et L'entretien page 23

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 27
A number of possible risks may arise when
operating your solid fuel fireplace with fuel of any
brand. T he said risks can be minimised if the
instructions and recommendations included in this
manual are followed.
a) Keep
any
flammable
curtains, clothes...) away from fireplace, at a
safety distance of at least 0.90 m. (Fig. 1)
b) Ash should be emptied into a metal container
and immediately removed from the house.
c) Do not use flammable liquids to light the
fireplace. Keep any type of flammable liquid
(petrol, gasoline, alcohol,....) at a distance from
the fireplace.
d) Periodically inspect the chimney and clean
whenever necessary. Also inspect the state of
joints, glass, screw s...
e) Do not install near walls that are combustible or
that feature any type of lining that may be
damaged or deformed by high temperatures
(varnish, paint...). Ensure that the top hot air
grilles
are not installed on combustible elements.
f)
Protect your hands with a glove or other
insulating material because, during operation,
the opening and closing handle will be hot.
When installing the insert fireplace, follow the
installation adv ice below for your ow n safety:
1. The base w here you are going to place your
insert fireplace must be flat and provide a
perfect seat for your fireplace.
must be built using heat resistant materials.
2. The gap w here your insert fireplace is
installed must be free of rubble and w aste
materials that may catch fire w hen the
fireplace is w orking.
3. The inside of the gap w here the insert
fireplace
is
to
appropriately insulated or built of materials
that resist high temperatures.
4. If insulation must be installed inside the
gap, do not cover the ventilation grille.
5. Nev er w rap the insert fireplace in insulation
material as this will damage it.
All manuals and user guides at all-guides.com
material
(furniture,
The base
be
installed
will
REPLACING THE POWER SUPPLY CABLE
If the power supply cable is damaged, it must
be replaced by the manufacturer or by the S.A.T. or
by qualified personnel, in order to avoid risks.
EQUATION, rejects any liability derived from a
faulty installation or incorrect use and reserves the
right to alter its products without prior warning.
Any liability due to manufacturing defects will be
subject to the criteria and verification of the
company's experts and will be limited to the repair
or replacement of its products, excluding any
construction work or damage the said repairs may
cause.
30cm
be
Fig. 1
30cm
Puerta
Door open
abierta
30cm

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Eqi-70r

Table des Matières