Maintenance; Filters; Light Bulbs - Westinghouse QR0313 Manuel De L'utilisateur

Maintenance

FILTERS

When filters wear out, replace them with similar filters with stainless
steel clips. Also replace damaged filters with punctures, bends, or
broken frames .
- Turn off the range hood and disconnect the power .
- Replace with an equivalent baffle net, then reconnect the
power .

LIGHT BULBS

When light bulbs burn out, replace them with a 35W /JDR 16, GU10
twist and lock base light bulbs .
- Turn off the range hood, disconnect it from its power
source, and ensure that the lights are cool .
- Turn the bulb (2) counter-clockwise to remove it.
- Insert a new bulb (3) and turn it clockwise to install it . Do
not release the bulb until you are sure the bulb has been
securely installed . Reconnect the power .
- If new bulbs do not operate, ensure that they are inserted
correctly .
All manuals and user guides at all-guides.com
1
14
DANGER: Turn off the power circuit breaker or the power
switch on the junction box before performing maintenance.
Touching circuitry inside the range hood while it is
energized will result in death or serious injury .
WARNING: Failure to replace worn out or damaged filters
will increase the risk of fire.
2
WARNING: Light bulbs can become extremely hot when
turned on . Do not touch bulbs until they are switched off
and cooled . Touching hot bulbs could cause serious burns .
3
2