Operation - Westinghouse QR0313 Manuel De L'utilisateur

Operation

There are four buttons, ON/OFF, SPEED, LIGHT and CLOCK SETUP .
The center screen will show the clock (12 hour) .
1
TURNING ON/OFF THE UNIT
- Press (5) to turn on the power .
When you turn the power on, the unit starts working in low
speed, the clock indication on the center screen (3) will
go off and "1" will be indicated on the screen . (During the
operation speed indication will be indicated on the screen) .
- Press (5) twice to turn off the unit while it is operating .
While the fan is off, the screen will display the time .
TO CHANGE FAN SPEED
While the unit is operating:
- Press the fan button (4) once, range hood will change to
medium speed and "2" will be indicated on the screen .
- Press the fan button (4) again to change to high speed and
"3" will show on the screen .
SET UP THE CLOCK FUNCTION
- Press the clock button (1) once, the center screen starts
flashing.
- Press the light button (2) to change the hour display and the
fan button (4) to change the minute display .
- During the setup, if no button is pressed for more than 5 seconds,
the setting displayed will be fixed.
- The setup can be done while the unit is running or not .
All manuals and user guides at all-guides.com
2 3
Please contact customer.service@conglomkb.com or 1-877-333-0098 for further assistance.
4
DELAY SHUT OFF FUNCTION
- While the fan is working, press (5) once, the fan and lights
will automatically turn off after 2 minutes .
The screen will indicate "2:00" and start counting down.
Once the countdown is completed, the range hood will
beep, the fan and lights will turn off automatically and the
clock will show in the screen .
During the countdown operation:
- You will still be able to change the speed by pressing (4) .
- Press (5) once more to stop the fan immediately .
TURNING ON/OFF THE LIGHT
- Press the light button (2) to turn the light on and off .
NOTE :
The clock will need to be reset if the range hood was unplugged or
the junction box was turned off. The range hood will function even
if the clock has not been set.
13
5
CONGLOMKB .COM