Installing The Range Hood - Westinghouse QR0313 Manuel De L'utilisateur

Installation (continued)
INSTALLING THE DAMPER (IF NECESSARY)
WARNING: Sharp edges . Wear safety gloves .
CAUTION: Be very careful when installing the damper .
Applying too much force or bending the damper too much
may damage or break the damper hinge ends .
The damper is pre-installed at the factory. Make sure that it has
not come loose during shipping and re-install it, if necessary.
- Insert one end of the damper (3) into the hinge slot (4) at
the top of the range hood (A) .
- Gently bend the damper (3) and insert its other end into the
hinge slot (4) .

INSTALLING THE RANGE HOOD

CAUTION: Make sure the range hood is secure before
releasing it .
- Lift the range hood (A) into position, engaging the two hood
brackets (D) with the two lower toggle bolts (AA) .
A
All manuals and user guides at all-guides.com
AA
D
Wall
Please contact customer.service@conglomkb.com or 1-877-333-0098 for further assistance.
3
4
A
ATTACHING THE DUCT
- Attach your ducting (5) (not supplied) to the range hood
(A) and connect the duct to your exterior exhaust system.
11
3
CONGLOMKB .COM