Alcad MVC-151 Mode D'emploi page 14

ENG - 14
Call repeater or selector-switch accessory (Relay) activated when
receiving call
CALL EXTENSION
S2 S5
2 5
AAL-200
SEVERAL MONITORS IN THE SAME APARTMENT
1. Connect all monitors in the house.
2. Program the monitors one by one and with the same button / code,
see "Programming instructions" Page 15
3. The monitor programmed in the first place will be the main monitor.
DIV-464
RISER
Functioning
Received the call in the apartment, it sounds on all monitors. The visitor's image
is automatically displayed on the first monitor that you have programmed in that
apartment. Possibility of displaying the image on the other monitors without having
to pick up the receiver, by pressing the auto-switch on button
the call from any of the monitors by pressing the communication button. Once the
communication is established from one of the monitors, it will not be possible to pick
up from any other, keeping the secret of the communication at all times.
VIDEODOOR ENTRY SYSTEM MONITOR
B1 B2
– +
S2
+
S5
–
MVC-151
RISER
2 MONITORS IN THE SAME APARTMENT
MVC-151
B2 B1
SWITCH SELECTOR
ACCESSORY
ASC-050
BUS
OFF ON
B1 B2 B2 B1
ON
Internal tap-off
OFF ON
disabled on
all monitors
Load disabled
ON
on all monitors
– +
S5
MVC-151
Poten�al free
contacts
OFF ON
B1 B2 B2 B1
MVC-151
. You can answer
B1 B2 B2 B1
S2
+
–
BUS
ON