Thrustmaster RGT Force Feedback CLUTCH Edition Manuel De L'utilisateur page 10

TROUBLESHOOTING
- My wheel doesn't work correctly or appears to be improperly calibrated. Switch off your PC,
completely disconnect your wheel, reconnect all the cables (including power adapter and pedal set),
switch your PC back on and restart the game.
If the calibration problem persists, download the "Thrustmaster Calibration Tool v 1.03 " manual calibration
software available on our website: http://ts.thrustmaster.com
- My wheel moves by itself during the game. This is normal and is the re-centering function featured in
some games. To stop these movements, just place your hands on the wheel or reduce the Force
Feedback intensity.
- My wheel stays turned to one side (left or right) after launching a game. This is normal in some
games. The wheel will re-center itself once you have identified it as a wheel in the game's setup options.
- My wheel is detected by my computer but doesn't work in the game. Access your game's options
interface to configure your wheel. Please refer to your game's user manual or online help for more
information.
- My game doesn't accept 5 axis mode.
Select 3 axis mode (or 2 axis mode, if the problem persists), then configure your wheel again in your
game's options interface.
- Force Feedback doesn't react properly.
In the Thrustmaster Control Panel, reset all forces to their default values (= to 100%) and disable
automatic re-centering (the LED should not be flashing).
In some games you will also have to reverse the forces (select "Negative Forces" in the game's options or
set the slider to "-100%"). In other games forces should not be reversed (in this case select "Positive
Forces" or "+100%").
- My pedals or levers are not functioning properly.
Your game does not accept the axis mode you have selected. Exit the game and select a new axis mode.
Re-launch the game and then configure your wheel again in your game's options interface.
SAFETY RECOMMENDATIONS AND INFORMATION
- When connecting the wheel and during auto-calibration: to prevent any incorrect calibration,
never turn the wheel, press the pedals or buttons.
- When not in use for extended periods and to avoid any unwanted power consumption or
deterioration, disconnect the wheel's power adapter. Reconnect it before going back to the
game.
- Your wheel features Force Feedback: NEVER leave the wheel within the reach of young
children, especially during the auto-calibration phases.
For safety reasons, never use the pedal set with bare feet or while wearing only socks
THRUSTMASTER DISCLAIMS ALL RESPONSIBILITY IN THE EVENT OF INJURY RESULTING
®
on your feet.
FROM USE OF THE PEDAL SET WITHOUT SHOES.
9/12