aqua LIPARI 100101201 Manuel D'utilisation Et D'entretien page 20

-
AQUA S.P.A. - .
VIA T CROTTI
- Protect the electropump against inclement weather.For long periods of inactivity or frost,
remove all the caps and completely drain the pump body. Keep the caps!
-
- Never let the pump run dry.
- Single-phase motors are provided with overload protection: they are connected directly
to the power mains. Three-phase motors must be protected with an automatic switch
(e.g circuit breaker) calibrated at the values shown on the data plate of the electropump.
- Connect to the mains by means of an omnipolar switch with a distance of at least 3 mm
from the contacts. Install a high-sensitivity differential switch (0.03A) as additional
protection.
L0200440
1 42018 S M
AN ARTINO IN RIO
–
(RE) WWW.AQUA.IT
ITALY
R .1 03/03/16
EV DEL
20