Partner P820T Instructions D'origine page 19

Husqvarna AB, S-561 82, Huskvarna, Sweden
Declare under our sole responsibility that the product(s);
Designation.................................
Designation of Type(s).................
Identification of Series.................
Year of Construction....................
Conforms to the essential requirements & provisions of the following EC Directives:
2006/42/EC, 2004/108/EC, 2000/14/EC, 2011/65/EU
based on the following EU harmonized standards applied:
EN60745-1, EN60745-2-13, EN55014-2, EN55014-1, EN61000-3-2, EN61000-3-3
Notified Body that carried out the EC type-examination
in accordance with article 8 section 2c....................... TÜV Rheinland LGA Products GmbH
Certificate no.: ............................................................ BM 50268376
The maximum A weighted sound pressure level L
is given in the table.
The maximum hand / arm vibration weighted value a
the above product(s) is given in the table.
The declared vibration total value has been measured in accordance with a standard test method and may be
used for comparing one tool with another.
The declared vibration total value may also be used in a preliminary assessment of exposure.
Warning:
The vibration emission during actual use of the power tool can differ from the declared total value depending on
the ways in which the tool is used
Operators should identify safety measures to protect themselves that are based on an estimation of exposure in
the actual conditions of use (taking account of all parts of the operating cycle such as the times when the tool is
switched off and when it is running idle in addition to the trigger time).
2000/14/EC: The Measured Sound Power L
tabulated figures.
Conformity Assessment Procedure............. Annex V
Ulm 12/02/2013
P . Lamelli
Global R&D Director - Hand held
Keeper of Technical Documentation
Type (P ____)
Dry Weight (Kg)
Power (kW)
Oil tank volume (cm
Maximum length of guide bar (cm)
Chain pitch (mm)
Chain gauge (mm)
Measured Sound Power L
Guaranteed Sound Power L
Sound pressure L
Uncertainty K
pA
Hand / arm vibration a
Uncertainty K
ah
All manuals and user guides at all-guides.com
L. EC DECLARATION OF CONFORMITY
Chainsaw
P818, P820T
See Product Rating Label
See Product Rating Label
at the workstation, measured according to EN60745-2-13,
pA
& Guaranteed Sound Power L
WA
)
3
(dB(A))
WA
(dB(A))
WA
(dB(A))
pA
(dB(A))
(m/s )
2
h
(m/s )
2
ENGLISH - 9
Tillystraße 2
D-90431 Nürnberg
Germany
measured according to EN60745-2-13, on a sample of
h
WA
818
4.3
1.8
180
35
9.52
1.3
106
110
95
2.5
7.68
1.5
values are according to the
820T
4.6
2.0
180
40
9.52
1.3
107
110
96
2.5
8.13
1.5