HoMedics MCS-325H-CA Manuel D'instruction Et Information Sur La Garantie page 7

Demo Button
For a brief demonstration of the features of the Back and Shoulder Shiatsu
Massaging Cushion, press the Demo button. The unit will briefly go through
each function. Once complete, the unit automatically turns off. The L.E.D.
light will blink to indicate the active functions.
Power Button
To turn on the massage functions, first press the POWER button. The L.E.D.
indicator will illuminate and confirm your selection. To turn off the massage
functions, simply press the button again. The L.E.D. indicator will blink while the
dual massage mechanism returns to its lowest point and then it will turn off.
Heat
For soothing heat when massage is on, simply press the heat button and the
corresponding red L.E.D. light will illuminate. To deselect, press the button
again and the corresponding L.E.D. light will turn off. For your safety, heat
cannot be turned on if no massage program is selected.
Spot Shiatsu
While the unit is in Shiatsu massage, press either button to stop and focus
the Shiatsu action in one place. Once the unit is operating in Spot Shiatsu,
you may adjust the mechanism position by holding down either button until
the desired position is reached. The Up Arrow will move the mechanism
upwards and the Down Arrow will move it down. Once you release the
button, the mechanism will stop in that place.
NOTE: As with all high-quality massage
products, there is a 15-minute auto shut-off
on the massage mechanism. Do not use this
unit for more than 15 minutes at a time.
Moving Shiatsu
massage mechanism
The actual product materials and
fabrics may vary from the picture
shown.
7